How to Replace a UPVC Window Handle

If your window handle made of upvc is damaged, don't panic. Replacing a upvc window handle is a fairly simple job and can be accomplished in a matter of a few steps.

No matter if you have a cranked or in-line espagnolette style window handle, they all have a square spindle bar that extends from the back plate and is slotted into the locking mechanism.

Find out the lock type and handle

Over time, window handles and locks could get damaged or lose function. The good news is that this issue can often be fixed without having to replace the entire window unit made of uPVC. The first thing to do is determine the type and size of the lock and handle. This will help you identify the replacement parts that you require.

Identifying the type of handle is done by looking at the handle's base. There will be a screw or pin holding the handle to its base. If the screw is gone it could indicate that the handle has split from the base. If the handle has split internally and doesn't hold onto the spindle anymore It could also be a sign that the handle should be replaced.

There are a number of different kinds of uPVC window handles The most well-known is the Espag handle. They are usually secured with two bolts, and the spindle engages the locking mechanism within the window frame. These handles are typically used on tilt and turn uPVC windows.

Another kind of uPVC window handle is the Cockspur handle. They are similar to the Espag handle, however they have a lower projection from the frame. These handles are typically used on older uPVC windows.

Venetian window handles are a different alternative. They are similar to Espag handles, but have a flat bottom that allows them to be installed in a flush position with the frame. These handles are a good option for homeowners who are looking for an elegant handle that will blend in with their uPVC frames. They are also available in a large variety of colors to match any style.

Measure the spindle

It is important to know how the handle is installed before you can order a replacement. This will tell you how tight or loose it is and if it will fit properly into the window frame. This can be done by identifying the handle's type and determining the spindle's measurement. The spindle is the steel shaft that connects the handle to the lock within the window frame. It's available in various sizes with the current industry standard being 8mm. Older handles could have a 9mm cross-section so it's crucial to determine the cross-section of the old one to ensure you get the correct size replacement.

There are several types of window handles, but the most commonly used are inline Espagnolette and Cockspur handles. These handles operate a locking mechanism in the window. They use shootbolt rods that secure the window once it is closed. Depending on the type of handle they are held in place by screws or pins.

You can find replacement upvc window handles on the internet and in many DIY stores. They are available in a variety of finishes and are suitable for both new or replacement windows. They can also be key-locking, or fire-escape non-locking for extra security.

To remove your old handle open the door and loosen the screws that hold it in place. Be careful not to cause damage to the screws and put them in a container to be stored for future use. After the screws have been removed, carefully remove the handle. Take a measurement of the distance from the base of the spindle to the top. This will give you the information necessary to purchase the right replacement handles for windows. The handle's spindle is the shaft made of metal that connects it to the lock gearbox within the window frame.

Remove the old handle

The replacement of the uPVC window handle is a simple task and usually takes less than five minutes using the proper tools. The first step is to determine the kind of lock and handle that will allow you to find the correct replacement. After that, measuring the spindle will help ensure that the new handle is a perfect for the job. The handle that was used previously needs to be removed and replaced with the new one.

The majority of uPVC handles are inline Espagnolette handles, with a central spindle that slots into the locking mechanism of the window. They are typically easy to remove but could require force if they get stuck. There are typically two screws that hold the handle in place, which can be removed using the help of pliers or a screwdriver. You may also need to remove pins, depending on the type of handle.

After removing the screws you can remove the handle that was previously attached. The top of the base plate will be visible once the handle is in the open position, revealing two screws that you can remove. There's also an unimportant silver or colour sticker that has to be removed if it's still in place.

With the screws that came off the handle, you are now able to screw the new handle into the appropriate position. The screw holes should be aligned on the window to the holes in the handle. After this is done you can put on the screw caps and test the new handle to confirm that it functions correctly. It's simple to swap a uPVC, but you need to make it right.

Replace the handle with a new one.

It's time to put in your new handle if you have successfully removed the old one from the frame. Begin by locating and removing the screw covers using your screwdriver. Once they are removed, put them in a safe location and proceed to the next step.

Next, place the new spindle inside the handle by lining it up with the existing hole and screwing it in. Align the holes on the handle to the holes in the window frame. Use screws of the same size as the previous.

uPVC Espag handles are equipped with a 7mm square spindle that turns the lock mechanism that is attached to the window. This style of handle is present in the majority of modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) come with long noses that lock over the outer frame or transom bar cross member and are typically found in older windows made of uPVC.

It is important to lock and unlock the window a few times after the handle has been installed. If everything goes according to plan, the new uPVC handle should be securely attached and working smoothly. If not, the above steps will help you identify any issues and resolve it quickly. If you're having trouble with your uPVC handle or any other glazed home improvement issues don't hesitate to call us at Bridgewater Glass for professional assistance. Our glaziers are certified to repair or replace a variety of window frames and handles making us a good choice for your double glazing window replacement-glazing requirements.

Test the new handle

As time passes and through regular use, uPVC handles and locks may be damaged and wear and wear and. This can make them less effective and secure and therefore it is important to replace them as soon as you can. This is also a good idea to do when you are upgrading your windows. Switching your lock mechanism and handle will help to maintain the integrity of your new windows.

When it is to uPVC window handles, there are many different styles. Some are secured by pins or screws while others feature blades that slot into the lock mechanism. Each lock type has its own way to replace it, so you need to know which one you own.

Espag window handles are the most popular type, and are usually found on newer uPVC windows. The spindle extends from the handle to the lock gearbox and activates the locking mechanism when you open the window. These handles are also easy to take off. However, it is important to be careful not to harm either the mechanism or handle.

Cockspur handles are another alternative for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur attaches to the wedge-shaped striker plates on the frame. This kind of handle may be more difficult to repair than other types, but it's an excellent choice for homes with a lot of windows.

Venetian window handles are fixed with two bolts. They have a low projection from the frame, in contrast to the Espag handle. They are ideal if you need an flush handle that blends in with your uPVC windows. They're an excellent choice for commercial and residential properties.