Double Glazing Door Lock Repairs

Has your uPVC window or door mechanism become faulty? Maybe the window or door handles don't meet up correctly or are difficult to use.

You will lose energy when your double-glazed doors do not perform as they should. This can also increase the likelihood of burglaries. Owen the Locksmith can fix your door lock at reasonable costs.

Snapped Key

It can be quite frustrating when a key is snapped inside a lock. It can also be a security issue in that it can leave you vulnerable to burglars if your door does not lock. Fortunately, there are some quick fixes you can attempt to fix the issue and get your door operating correctly.

Keep calm. If you panic, you could end up pushing the broken key piece further into the lock.

Next, spray WD-40 or another penetrating oil into the lock to help the broken piece to slide out more easily. You can also use the screwdriver to break up any pieces stuck. If you have a part of the key that is stuck and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the broken key piece further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of them handy, you can use needle-nose pliers that bend to create a hook. Finally, a pair of tweezers is a good way to grasp and remove the remaining bit of the broken key.

If you can't get the broken piece of the key out, you can try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture that may be present inside the lock.

If none of these methods appear to be working you, it's time to call in a locksmith. Fitlocks experts can quickly solve problems like broken handles or snapped keys with upvc repairs near me locks and door mechanisms. They can also modify your double glazing door mechanisms to make them easier to operate. Get a double glazing repair with us online, or give us a call to discuss your needs.

Broken Cylinder

A broken cylinder can be a major security risk. It's a good thing that it's a simple repair for an expert locksmith to complete. A locksmith must tap the cylinder to fix it. They can do this using the hammer or any other tool, but the most efficient way is to employ a long match or a piece of wire. Then, put the end of the match or wire in the keyway. After that, the locksmith can strike the lock to crack it open. This is superior to using a hammer, which can harm the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can occur when the cylinder block and cylinder head are made of various metals, such as cast iron and aluminum. When the different metals are heated and cool at different rates, it could create hotspots in the local area that expand faster than the rest of the cylinder head, thus leading to cracks.

Corrosion is a different cause of cylinder fractures. If the cylinder block and head are not maintained correctly they may be corroded or rust and cause them to expand more than expected. Over time, this can also lead to cracks.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn it could be due to a variety of reasons. This issue could result from a defective locking mechanism, or misalignment and also a worn out handle.

This is a straightforward and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will typically be able to solve the issue within an hour of arriving at your property. They can fix the locking mechanisms, or replace the window handles and replace the gearboxes, depending on the specific requirements of your home. A locksmith with experience can always advise you on the most cost-effective options for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders which provide an additional security layer from burglars. It's a small price to pay for the peace of mind that comes from knowing your uPVC doors are secure.

Broken Handle

It's not surprising that window handle locks could break. They are equipped with complex mechanisms that become less effective over time. It can be difficult to determine the reason for the problem and then fix it properly.

Repairing your damaged handle, whether it's an internal locking mechanism or latch will increase the security of your uPVC door and prevent draughts. It could be costly to replace or repair the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.

Screwdriver: With the window open remove the screw that holds the handle. This should be located on the inside of the back plate, which is usually concealed by an attractive cover for the screw for aesthetic reasons. Be sure not to damage any of the internal components inside the handle, like the plates or levers that are on either side of the spindle. Keep them in the same order so that it is easier to replace if necessary.

Then, using another screwdriver, loosen the screw that holds the handle to the spindle on the back. Once this is loose, you should be capable of pulling the handle off and take out the broken spindle. Replace it with a new one, ensuring it's the same length as the previous one (you can usually find these on the internet or in hardware stores) and then securely screw it in the right place. Be cautious not to overtighten because this could cause damage to the handle or the window frame.

Make sure the new handle is installed, then close and test the handle. It should operate smoothly and you'll be able to open your windows once again.

While you're working on the handle, make sure to ensure that your uPVC windows are shut correctly. If they don't then you may experience damp and draughts in your home as and also affecting the efficiency of your home's energy usage. Core Sash Windows is a local window company that can adjust the hinges on your window replacement frames to ensure they close correctly.

Broken Spindle

It is often the case that the spindle within the handle is broken, not the handle itself. This is especially common with uPVC tilt-and-turn windows. These kinds of windows require a handle which is a lock mechanism that is located in the window frame. The handle is attached to a central rod which activates cams with a mushroom shape that lock into the window frame keep. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has broken This can be a very frustrating issue.

Fortunately there are options to rectify this issue. A skilled locksmith can quickly and effectively fix the issue. They can take apart the window handle using a tool to remove the wheel part of the mechanism, where the spindle goes. This is done without damaging the handle or causing other damage to the window frame.

After the wheel has been removed the technician can then inspect the spindle and determine what has caused it to break. This involves disassembling the spindle, and then examining each component part, noting any damage or excessive wear. This process is usually carried out by technicians working in an environment that is clean.

The next step is to clean the damaged spindle. This helps eliminate any dirt or other debris that might be obstructing its normal operation. The spindle may be replaced or repaired. If it's being replaced, the technician could use a dowel of a similar size to the original and drill mating holes into both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle can't be repaired it may require replacement completely. Home centres sell generic replacements, but if the design of your window is rare then it will be necessary to speak with a woodworker or cabinet maker who can duplicate the exact model for you. Once the spindle has been installed, it is attached to the handle. The screw holes on the handle to the existing screws in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.