UPVC Window Handle Replacement

It's easy to repair a damaged window handle with the proper tools. It is important to know your handle's type and spindle's length prior buying an alternative.

Older uPVC windows have cockspur handles for windows. They have a spur that protrudes to lock over a cockspur wedge striker plate. These can be right-handed or left-handed, and must be compatible when replaced.

What type of lock or handle do I have?

There are a myriad of windows locks and handles made of upvc each with its particular advantages and uses. The type of handle you have will determine how easy it is to open your windows and whether or not the locking mechanism functions according to the plan. With time and regular use, window handles made of upvc may become damaged or worn out, rendering them less effective and secure. In some cases they could even fall off completely. If you find that your window handles have fallen off, it is important to repair them as quickly as possible. This will help prevent burglaries and will keep your home secure.

It's a simple job that almost anyone can do. You'll require some basic tools, but with the proper knowledge, it's an easy task that will only take a few minutes. To begin you must determine the type of handle and lock you have on your window made of upvc, which will help you to find the ideal replacement.

Inline Espagnolette Handles

They are typically located on the outside of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles feature a spindle that runs through the middle of the handle into the window frame to control the latch.

Cockspur Handles

They are typically found on older uPVC window frames and feature distinct hook-shaped designs. Cockspur handles are attached to the frame of the window by one screw, and are less secure than other varieties of window handle.

Handles that turn and tilt

The tilt and turn handles are different from other upvc handles because they can be turned to open the window and then lowered into the window to ventilate. They have a 7mm spindle in the back and are available in right-hand and left-hand versions.

When buying replacement upvc handles it is essential to check the spindle length since not all of them are identical in size. To determine the length of your handle made of upvc, simply drop something in the middle of the hole and then measure how far down it goes before it comes into contact with an obstruction. This is the length of the spindle that will fit in your window.

What is the spindle?

uPVC window handles work in a similar way as doors, with the user turning the handle to operate an opening inside the frame. The window then opens and shut. The handles could be damaged, especially if they're frequently used or subjected to harsh conditions. You may need to replace window handle the handles on your uPVC window if they are not functioning properly.

There are a variety of uPVC handles available including Espag, Cockspur and Spaded handle options. They are designed in a variety ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. This is why it is crucial to identify the kind of handle you have on your uPVC window to get the correct replacement.

You can check what type of uPVC handle you are using by looking at the base section of your handle. There should be a'snap in cover over one screw which holds the handle base in the correct position. Remove this and then you should be able to see the second screw located at the opposite end of the base section of the handle. Once both screws are removed you should be able to pull the handle away from the uPVC window.

After removing the uPVC handle, remove it from the locking mechanism. Take note of the length of the spindle. You will need to purchase a new one that is the same length as the handle that was originally used and locking device.

The main issue with most window handles made of uPVC is that the handle spindle gets worn out and can no longer operate the locking mechanism. This can be due to wear and tear from continuous use or a loosening of the locking mechanism, or even rust over time. If this occurs, you will need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove the handle from the previous one?

Window handles can be damaged or destroyed over time. It is crucial to fix them as soon a possible to ensure your safety. Fortunately, replacing a damaged or worn handle is a simple job that can be completed in just over an hour and doesn't require any specialist tools.

To take off the handle, first remove the screw located at the bottom of the handle. Once the screw has been removed, the handle will be pulled away. A second screw is located at the bottom of the handle. It can also be removed. After these two screws have been removed, the handle will be removed from the window's base.

After removing the handle, align the fixing holes of the new handle with the existing holes in the window frame. There may be a little cap or sticker on the new handle, so take them off the caps if needed, and then screw the handle in the frame. It is essential to ensure that the handle works once it is put in place. Turn the handle around and ensure that the lock mechanism is working.

Espag handles feature spindles that extend out of the handle and slots into the multipoint locking mechanism that is on the window frame. Cadenza windows feature blades with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that is able to hook over either the outer frame or transom bar cross-member in the window.

Once you have the new handle in place, you can insert the spindle inside the lock inside the window and then tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is securely fixed. When the handle is ready to use, open and close the window a few times to make sure that it functions properly and securely.

How do I put in the new handle?

Changing your uPVC window handle isn't difficult, and the process is simple. All you need is an screwdriver and a bit of perseverance. The first step is make sure that the handle you have previously used is in the unlocked position and then remove any screws that are visible, you can replace them with screw caps if required. After removing the handle, you need to make an outline of the length of the spindle that protrudes from the back of the handle. This is important because it will determine the kind of handle you will need to purchase.

Espagnolette handles are the most common type of handle for uPVC windows. They have a spindle which runs through the handle, and is responsible for a locking mechanism within the frame of the window. The handle opens the latch and allows the window to open. When used regularly and over time, handles made of espagnolette can be damaged.

Cadenza handles are a type of uPVC handle that is usually used in tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are generally more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced with the same procedure as espagnolette handles however you will need to make sure that the new handle has an angled blade instead of flat ones.

Once you have determined the right handle for you, you can simply line up the new handle with the existing screw holes and then screw it into place. After that, you can put the screws on and test your new handle. You can accomplish this by moving the handle between the locked position to the unlocked several times. If you experience any issues, it could be beneficial to speak with a professional to see if they are able to help resolve the problem. They can often advise you on the best way to solve the issue in a speedy and effective manner.