Choosing uPVC Replacement Window Handles

Most customers agree that the Upvc replacement handles are simple to install and feel great. However, it's important to know that the type of handle you select must be right for your window.

The height of the step is the most important factor. It is the distance between the handle and the frame or base. Other factors to consider are lockable styles and mechanisms.

Replacement parts

You can purchase a range of replacement upvc handles. They come in a variety of styles and colors so there's bound to be something that will fit your existing windows. It's easy to impulse buy, particularly when the handle breaks so it's best to look over certain things prior to committing to purchasing a new one. The first thing to consider is the kind of upvc handle do you currently have and what the difference between types is. The table below lists the most common handles to help you choose the one that will fit your windows made of upvc.

The majority of double glazing window replacement-glazed windows today have handles for epag. They are typically attached to the frame by two screws that screw into the frame from both sides, above and below.

The spindle bar on the back can be different in size, and will determine if they're left-handed or right-handed. It's important to take the measurements of the handle you currently must ensure that you purchase the appropriate replacement.

The arm is attached to the frame by two bolts, just like the Espag handle. However, the handle is curved at a low angle so that it doesn't damage your blinds. This is a great choice for those who want the handle to blend in with your blinds, and you have upvc windows.

Cockspur handles look similar to Espag handles, but they have a nose that closes over a wedge that rests on the frame of the window. This type of handle is commonly found on older upvc windows as well as some wooden windows.

Tilt and turn handles are usually found on casement windows and can be operated by turning the handle or pushing at the top of the window. The window is opened from the inside, allowing you to clean the outside without having to climb to the ladder or climb over the fence. They're also a great option for those who have mobility issues, and can enhance security and access to the home.

Tips and tricks

There are a number of different kinds of uPVC window handles, and lots of people will find themselves replacing them at some time. If this happens it's a good idea to know a few tips and tricks that will make the process go as smoothly as possible.

The first thing to do is check what type of handle you have at home. Depending on the type of handle and the locking mechanism, it may be necessary to replace the handle and lock. For example, if the shoot bolts (espag) and roller cams are seizing or jammed, you will need to replace them as well as the handle itself.

Thankfully, most uPVC handles are very similar and follow industry standard sizes, making replacing them a fairly simple task. First, remove the screw covers on the handles. These are usually pozidrive screws. After these screws are removed, you can remove the handle.

It's a great idea note how much the spindle sticks out from the base of the handle after you take it off it. This will allow you to measure the length of the spindle to determine the replacement handle. Simply measure the amount that the square peg sticks out of the bottom of handle.

This is especially important for inline uPVC window handles since they are always straight and open left or right, and will not operate in the middle. If you're unsure of the kind of handle you have at home, it could be an excellent idea to borrow an existing handle from your neighbour's home and see how it functions to get an idea.

You can also determine the hands of a uPVC window by observing how the handle spins when it is used. Handed handles will turn either clockwise or anti-clockwise. If you're not sure then you can always ask someone else to open the window using the handle, and work out how it operates in this manner.

Find the spindle's measurement.

The selection of the right replacement handle for your windows could be difficult as different handles are not the same size. It is essential to measure the spindle accurately when fitting the new handle. This will ensure that the handle fits. There are many different kinds of uPVC window handles and they work in different ways, so it is vital that you know what type of handle you have as well as the type of locking system you have.

The spindle of the espag handle extends out from the handle's rear and is connected to the lock gearbox in the window frame. When you turn the handle this turns the lock inside the gearbox and opens the window. They are generally used on uPVC casement windows and they can be locked with keys to offer additional security.

Cockspur handles are equipped with an «nose» that closes over a wedge-shaped striker block on the frame and they are commonly found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. It can be more difficult to replace these handles since they are less common than the handles made of espagnolette.

If you own a tilt-and-turn uPVC and you require a replacement handle with an alternative locking system. The handle will tilt the window and also allow it to be rotated around to fully open it. You should select an opening handle that has an opening of at least 55mm in order to be able reach the window frame.

You can follow the same method to remove and replace this type of uPVC handle, but you must be cautious when removing the old one. It might be necessary to open the window a bit wider than normal to reach both screws that attach it to the frame. After you have installed your new uPVC handles and confirmed that they are in the proper position, you can tighten up the screws and then check to make sure the lock works properly.

Replace the handle with the new one.

When you have the proper handle replacement it is easy to screw into the right place. It will require a screwdriver, and an electric one might be a lot easier. When screwing, it is crucial not to over tighten the screws as this could cause the handle to warp or crack.

The second step in installing the handle is to put in the spindle. It is the part that is inserted into the handle and controls the locking mechanism inside the window. It is essential that it is installed correctly since this will ensure the window is able to be shut and opened securely.

There are many different types of uPVC handles. These include:

Espagnolette Handles — these are handles that are inline and can be used to tilt and turn windows to open the window replacement near me.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curvaceous shape which is ideal for hard-to reach windows.

Tilt and turn handles — These are used to control the opening mechanisms and closing mechanisms on tilt and move windows.

The majority of uPVC window frames are equipped with these. In the UK they are often called «Bay Windows».

If your uPVC window handle is broken, it can be very frustrating. There is no need to change the entire uPVC window because of a broken window handle. There are many simple ways to repair or replace a broken uPVC window handle.

You can fix your broken window handle quickly by identifying the type and measuring the spindle. It is crucial to take your time and prioritise security when working with windows and tools however, this is a easy task. It could mean the difference between having a safe and secure home or a window that can be easily opened. If you have any questions or would like to speak to a professional about replacing the handle on your window, call Bridgewater Glass. Our team is experienced and knowledgeable to help you with any problem.