Replacement Upvc Window Handles

Most replacement windows handles made of upvc come with everything you require. However, if your old handle was secured by screws or pins, they will need to removed. Then, you need to remove the snap-in cover at the base of the handle.

You'll need to determine what kind of window lock and handle you're replacing. This is crucial!

Espag

Espag handles are a multipoint lock system that is used to secure casement windows, such as uPVC and wooden double glazing. They feature a 7mm square spindle which is fitted into the gearbox of a uPVC window and when the handle is turned, it triggers with a series of locks that run around the perimeter of the window. Espag handles, also referred to as shootbolts, offer more security than the single point locks found on older frames.

They are available in a range of different options such as inline and cranked handle designs that can be used for either left or right hand operation. You can even find a variety of sleek ergonomically designed handles that are made to enhance both the feel of the handle as well as how it appears on your windows.

If you're planning to replace your current uPVC window handle with an espag type handle, you'll be required to determine the dimensions of the spindle installed and measure the measurement from the base of the handle in order to order the correct replacement. This measurement is referred to as step height and can help you find the perfect uPVC handle for your home.

You may need to remove any screws that are protecting the screws that hold the handle in place, and if that's the case, you can use a screwdriver to remove these or pliers to remove the pins holding the handle. After taking off the screws or pins that hold the spindle together, you can disassemble the handle.

Once you have the handle removed, you will then be able to access the locking mechanism inside the frame of the window and take out the wedge block cockspur that is attached to the handle to allow the window glass replacement to open. The new uPVC window handles you have purchased will now be able to fit on the cockspur wedge block and then into the spindle for the handle and allow the window to be opened again. If you want to be sure that your uPVC handles are secure you should replace the cockspur block a brand new one.

Cockspur

Cockspur handles can be found on older uPVC or aluminum windows. The handle is closed and then turns into a wedge-shaped receiver catch. (Not to be confused with timber latches, which are also covered in this section.) The handles are lockable or non-lockable. They are available in a range of different nose heights to suit the existing frame.

The handle is secured with a small triangle-shaped spur (spur) that is attached to the frame. They are typically one-way handles, however the deadlock cylinder with a locking mechanism is a possibility to add security.

As with Espag handles, replacement handles for cockspur handles are simple to put in place all you need is new screws (supplied) and the correct backset. The backset is the distance from the baseplate of the window to the underside of the handle's nose. Aluminium window frames are generally 9mm wide, whereas UPVC is 21mm wide. There are many variations, so it's essential to take measurements prior to purchasing the handle.

The spindle, or in certain instances, the entire handle assembly can be removed by unscrewing the handle. The replacement handle can then be screwed into place with two pozidriv screws. The pozidriv screw is available in a brass or zinc finish, to match the hardware you already have. There is also an option of a self-locking pozidriv screw.

This is a simple to install cockspur handle replacement that is perfect for repairing or replacing old uPVC windows. They feature a universal design, making them suitable for a variety of profiles and backsets. Each handle comes with three packers, each of a different thickness. They are installed on the underside of handle noses and can be combined to achieve backsets as small as 9mm or as large 21mm. They are available in right and left handed versions, and are available with lockable or nonlockable models with a choice of nose heights.

Tilt and Turn

The top European window style of tilt and turn has been around in Europe for a long time, but it is only now starting to gain popularity in the American market. They combine the advantages of three different window types into one — tilt, pivot and in-swing. This makes them suitable for older homes as they can be used to provide a greater level of ventilation than standard window types.

When closed, tilt and turn windows lock as a normal fixed window. By turning the handle either 90or 180 degrees, depending on the tilt-and-turn type of window, the sash will open inwards, and the window will turn inwards to allow for air circulation. This is a great method to let air circulate without the need to open a large windows, which can be a safety danger if not properly secured when opening.

If the handle is turned 90@ or 180@ the sash will be fully opened as a door. This allows full air exchange which is especially beneficial in rooms with a lot of draft or houses where odors from smoke or other sources can accumulate. It also makes cleaning the outside of the glass much more easy because it can be done from inside the house — a job that usually requires ladders that are not safe.

Tilt-and-turn windows are also very secure. They are difficult to open if locked in closed position. They also feature double seals that keep rainwater out of your home when it is in the tilted position or swing. This is a beneficial feature for older homes where burglars are more likely to target windows that are opened using the side hinges.

Spade

There are many different kinds of handles that can be installed on upvc double-glazed windows. There are two kinds of handles: Cockspur and Espag. Other options include tilt and turn handles as well as blade or spade handles, monkey tail handles and other types. The kind of handle you pick will depend on your preference and the kind of windows you have.

To select the right replacement upvc window handle, you need to know how the existing handle is attached to the frame. This is called handing and is a crucial aspect to know, particularly when buying online as some handles aren't suitable for all windows. For instance, certain handles are angled whilst others are straight and will turn left or right. You'll also require the size of the spindle which is the distance between the base of the handle and the head of the handle.

Another important part of choosing the correct handle is knowing whether your windows require a restrictor or not. They are typically used in high-rise flats or commercial buildings, however they're not a requirement for most domestic homes. Additionally, you must think about step height, which is the distance from the bottom of the screw plate to the apex of the handle.

The word spade comes from Old English spadu or spaedu and has been translated into various languages, including German spaten and Low German Spathen. During the Harlem Renaissance of the 1920s in New York City the word spade was used to denigrate black people. Since the time spade has been an emblem of African American pride and heritage.

It is crucial to select the correct size when replacing a handle that is Cadenza-style. Handles are available in straight and angled styles that differ by a few millimeters. The handle head is available in a variety shapes that include a T or D shape. It can also be left without handles.