UPVC Window Handle Replacement

It's simple to repair a damaged window handle with the right tools. It is important to know what kind of handle you have and the spindle's size before you purchase an alternative.

Older uPVC windows feature cockspur window handles which have spurs that protrude to the lock of a wedge cockspur striker plate. They can be left- or right-handed, and must be compatible when replaced.

What kind of lock or handle do I have

There are a myriad of upvc window locks and handles each with its distinct advantages and functions. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism works in the way you want it to. With time and regular use, window handles made of upvc may become damaged or worn out, rendering them less secure and effective. In some cases they may even fall completely off. If you notice that your upvc window handles have been removed, it's important to repair them as quickly as possible. This will prevent possible break-ins, and keep your house safe.

It's a simple job that almost anyone can do. You'll require a few basic tools, but with the appropriate knowledge, it's simple and should only take a couple of minutes. It is important to know the type of handle or lock that you have on your window. This will allow you to choose the appropriate replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle to the window frame in order to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are held to the frame of the window by only one screw and are less secure than other kinds of window handle.

Tilt and Turn Handles

The tilt and turn handles are different from other upvc handles in that they can be turned for opening the window, and then tilted into the window to ventilate. They feature a 7mm spindle at the back and are available both in left and right-handed versions.

When buying replacement upvc handles It is crucial to verify the length of the spindle as not all are identical in size. To determine the length of your handle made of upvc, simply drop something in the middle of the hole, and then measure the distance it travels before it reaches an obstruction. This is the length of the spindle that will fit in your window.

What is a spindle?

uPVC window handles function in a similar manner like doors. By turning the handle, you will be able to open a latch in the frame. The window can then be opened and closed. However, in some cases, the handles may become damaged, particularly when they are frequently used or exposed to harsh weather conditions. It is possible to replace the handles on your uPVC window if they're not functioning properly.

There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety ways to fit into uPVC frames. Each handle style uses an entirely different spindle for locking the window mechanism. It is essential to determine the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.

You can find out what kind of uPVC handle you are using by inspecting the base of your handle. A snap-in covers should be over the screw that holds the handle's base in place. Take it off and you should be able to see the second screw at the opposite end of the base of the handle. After both screws are removed, you should be able remove the handle from the uPVC.

After you have removed the uPVC handle, carefully remove it from the locking mechanism. Take note of the length of the spindle. You'll need to purchase a replacement handles for upvc windows with the same length as the handle that was originally used and the locking device.

The spindle wears down and becomes inoperable with the locking mechanism. This could be due to corrosion, damage due to frequent use, or the locking mechanism becoming looser. If this occurs, it is required to replace the window handle as well as the locking mechanism to restore complete functionality to your uPVC windows.

How do I take off my old handle?

Window handles are susceptible to being damaged or broken over time. It is important to repair them as quickly as possible to ensure your safety. It is easy to replace a damaged or worn handle. The job can be completed in under one minute without the need for any special tools.

The first step to remove the handle that was previously used is to remove the screw located at the top of the base of the handle. After the screw is removed, the handle can be pulled away. There will be a second screw that is located at the bottom of the handle base, and this can be removed too. When both screws are removed, the handle can be completely detached from the base portion of the window.

After removing the old handle and align the fixing holes of the new handle with the holes already present in the window frame. If there is a cap or sticker on the new handle remove it if necessary and then screw the handle in place. It is crucial to verify that the handle works once it has been installed. Turn the handle and make sure the lock mechanism is working.

Espag handles come with an elongated spindle that extends from the handle and slots into a multipoint locking mechanism inside the frame of the window. Cadenza windows come with blades with cut-outs that slot into the lock mechanism while Cockspur handles have an extended nose that hangs over the frame's outer or transom bar cross member in the window.

Once you have installed the new handle, place the spindle inside the window lock and tighten it. Once the handle is securely fixed and secured, replace the snap-in cover and the screw cap (if necessary). The handle is now ready for use by opening and closing the window a few times to ensure that it works correctly and securely.

How do I install the new handle?

It's not difficult to alter the handle on your uPVC windows. The procedure is easy. All you need is a screwdriver and a little bit of patience. The first step is to ensure that the handle is not locked and then remove any screws that are visible. you can also replace them by screw caps if you need. Once the handle is removed, you need to make a note of the length of the spindle that protrudes from the back of the handle. This is important as it will determine the kind of handle that you will need to buy.

Espagnolette handles that are made of uPVC are the most sought-after kind of handle. They have a spindle which runs through the handle, and is responsible for an internal locking mechanism within the frame of the window. The handle releases the latch, allowing the window to open. During regular use and over time, handles made of espagnolette can be damaged.

Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They have an extended blade that works a multipoint locking mechanism within the window. They are usually more secure than handles made of espagnolette because they are only accessible from the inside. They can be replaced with the same procedure as espagnolette handles however you should ensure that the new handle has a curved blade as opposed to flat ones.

After you have chosen the right handle, simply align the new handle with the existing screw holes prior to fixing it with screws. Then, put the screws on and test your new handle. This is accomplished by shifting the handle from the locked position to the unlocked and the reverse direction several times. If you encounter any issues, it could be beneficial to speak with a professional to see if they are able to help resolve the problem. They are often able to advise you on the best approach to resolve the issue in a quick and efficient way.